How To Reset a Rolson Combination Lock 3 Digit? Now put your newly set combination to check whether the lock opens or not. Do so while maintaining the lock position of the shackle. In order to lock it again set any one number on the dial. This is because you have just reset a new combination. Then turn it and put it back into the locking position. Once done, stop pushing the shackle downwards- release and pull it upwards. With this, reset the digits to your new combination such that the digits align with the red line. You will have to maintain the same position of pressing the shackle down. Step 3: Resetting the Combination Password Open and then Rotate the shackle 90-degrees. This is the factory setting of a TSA lock.Īfter performing the previous step, the lock will click open. for a new lock, simply align the 3 digits to “000”. If you are resetting the combination lock for the first time i.e. If you are changing the password, not for the first time, put down the combination that you have been using till now. Steps to Reset A Combination Lock 3 Digit TSA007 Step 1: Set your Current Password How To Reset A Combination Lock 3 Digit TSA007? Rotate the reset tool 90-degrees to where it was at the starting. Once you have finally put down your desired combination, it’s time to remove the tool. Finally, this way you will attain the new combination.

Then turn the dial again in the opposite direction and end on the number of your combination. Turn the dial on the number of your combination.Īfter this perform one full rotation in the opposite direction, such that you pass through the first number you chose. Pick any 3 letters/ numbers that you want to be a part of your new combination. Make sure you achieved three full rotations to ensure that the new combination will work. To do this, rotate the dial of your lock three times. Therefore try whichever way it turns- clockwise or anticlockwise. Most of the time you have to turn it in the direction such that it faces the shackle of the lock. Step 3: Turn the tool such that the master logo faces you The master logo should be turned to the side facing the shackle. Make sure the reset tool goes all the way into the keyhole. If lost, purchase its replacement from a hardware store or locksmith else you won’t be able to reset the lock. It has a master logo rounded on the top of it.

The reset tool comes along with the master lock itself. Take your reset tool and slide it down into the keyway of your combination lock. All you need to do is identify which type of master lock you possess and perform the steps to reset accordingly.

Master lock offers you the ease to change the combination whenever you need to.

Brinks combination lock stuck open